Lines Matching refs:programmer
46 All operations involving any chip access (probe/read/write/...) require the ``-p/--programmer`` opt…
78 (e.g. when using the **internal** programmer).
82 …is required to flash an Intel system with locked ME flash region using the **internal** programmer.
265 **-p, --programmer <name>[:parameter[,parameter[,parameter]]]**
266 …Specify the programmer device. This is mandatory for all operations involving any chip access (pro…
270 * ``dummy`` (virtual programmer for testing **flashrom**)
283 … (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family based USB SPI programmer)
284 …* ``serprog`` (for flash ROMs attached to a programmer speaking serprog, including som…
336 Some programmer drivers accept further parameters to set programmer-specific parameters. These para…
337 from the programmer name by a colon. While some programmers take arguments atfixed positions, other…
342 internal programmer
513 dummy programmer
516 The dummy programmer operates on a buffer in memory only. It provides a safe and fast way to test v…
531 The dummy programmer supports flash chip emulation for automated self-tests without hardware access.
583 …To simulate a programmer which refuses to send certain SPI commands to the flash chip, you can spe…
642 more than one card supported by the selected programmer is installed in your system. The syntax is::
646 where ``xxxx`` is the name of the programmer, ``bb`` is the PCI bus number, ``dd`` is the PCI devic…
653 atavia programmer
664 atapromise programmer
667 This programmer is currently limited to 32 kB, regardless of the actual size of the flash chip. Thi…
669 You may use this programmer to flash firmware updates, since these are only 16 kB in size (padding …
671 nic3com programmer
679 nicintel_spi programmer
684 nicintel_eeprom programmer
687 This is the first programmer module in **flashrom** that does not provide access to NOR flash chips…
694 gfxnvidia programmer
700 satasii programmer
707 ft2232_spi programmer
759 serprog programmer
766 the programmer. The device/baud combination has to start with ``dev=`` and separate the optional ba…
787 The particular programmer implementation needs to support this feature, for it to work. If the requ…
793 buspirate_spi programmer
846 pickit2_spi programmer
863 dediprog programmer
894 rayer_spi programmer
919 raiden_debug_spi programmer
956 pony_spi programmer
961 serial bitbanging programmer named "serbang". The optional ``type`` parameter accepts the values ``…
973 ogp_spi programmer
981 If more than one card supported by the **ogp_spi** programmer is installed in your system, you have…
985 linux_mtd programmer
998 linux_spi programmer
1015 mstarddc_spi programmer
1025 Before using this programmer, the display **MUST** be in standby mode, and only connected to the co…
1051 ch341a_spi programmer
1054 The WCH CH341A programmer does not support any parameters currently. SPI frequency is fixed at 2 MH…
1058 ch347_spi programmer
1070 ni845x_spi programmer
1081 In the case if none of the programmer's supported IO voltage is within the supported voltage range …
1108 digilent_spi programmer
1119 dirtyjtag_spi programmer
1126 where ``spispeed`` can be any value in hertz, kilohertz or megahertz supported by the programmer.
1130 jlink_spi programmer
1135 The **MOSI** signal of the flash chip must be attached to **TDI** pin of the programmer, **MISO** t…
1137 programmer which can be selected with the::
1144 Additionally, the ``Tref`` pin of the programmer must be attached to the logic level of the flash c…
1145 The programmer measures the voltage on this pin and generates the reference
1179 stlinkv3_spi programmer
1182 This module supports SPI flash programming through the STMicroelectronics STLINK V3 programmer/debu…
1215 realtek_mst_i2c_spi programmer
1218 This programmer supports SPI flash programming for chips attached to Realtek DisplayPort MST hubs, …
1247 parade_lspcon programmer
1250 This programmer supports SPI flash programming for chips attached to Parade Technologies DisplayPor…
1255 mediatek_i2c_spi programmer
1258 This programmer supports SPI flash programming for chips attached to some Mediatek display controll…
1261 The programmer is designed to support the TSUMOP82JUQ integrated display driver and scaler as used …
1263 … chips may use compatible protocols but have not been tested with this programmer, and external ch…
1267 and must explicitly be set to ``yes`` in order for the programmer to operate. This is required beca…
1404 …pic and associated **flashrom** options in the **Laptops** paragraph in the **internal programmer**