Lines Matching +full:led +full:- +full:1

1 What:		/sys/class/leds/<led>/device_name
4 Contact:	linux-[email protected]
8 What:		/sys/class/leds/<led>/interval
11 Contact:	linux-[email protected]
13 		Specifies the duration of the LED blink in milliseconds.
21 What:		/sys/class/leds/<led>/link
24 Contact:	linux-[email protected]
28 		If set to 0 (default), the LED's normal state is off.
30 		If set to 1, the LED's normal state reflects the link state
32 		Setting this value also immediately changes the LED state.
35 What:		/sys/class/leds/<led>/tx
38 Contact:	linux-[email protected]
42 		If set to 0 (default), the LED will not blink on transmission.
44 		If set to 1, the LED will blink for the milliseconds specified
50 What:		/sys/class/leds/<led>/rx
53 Contact:	linux-[email protected]
57 		If set to 0 (default), the LED will not blink on reception.
59 		If set to 1, the LED will blink for the milliseconds specified
65 What:		/sys/class/leds/<led>/offloaded
68 Contact:	linux-[email protected]
70 		Communicate whether the LED trigger modes are offloaded to
73 		If 0, the LED is using software fallback to blink.
75 		If 1, the LED blinking in requested mode is offloaded to
78 What:		/sys/class/leds/<led>/link_10
81 Contact:	linux-[email protected]
85 		If set to 0 (default), the LED's normal state is off.
87 		If set to 1, the LED's normal state reflects the link state
89 		Setting this value also immediately changes the LED state.
93 What:		/sys/class/leds/<led>/link_100
96 Contact:	linux-[email protected]
100 		If set to 0 (default), the LED's normal state is off.
102 		If set to 1, the LED's normal state reflects the link state
104 		Setting this value also immediately changes the LED state.
108 What:		/sys/class/leds/<led>/link_1000
111 Contact:	linux-[email protected]
115 		If set to 0 (default), the LED's normal state is off.
117 		If set to 1, the LED's normal state reflects the link state
119 		Setting this value also immediately changes the LED state.
123 What:		/sys/class/leds/<led>/link_2500
126 Contact:	linux-[email protected]
130 		If set to 0 (default), the LED's normal state is off.
132 		If set to 1, the LED's normal state reflects the link state
134 		Setting this value also immediately changes the LED state.
138 What:		/sys/class/leds/<led>/link_5000
141 Contact:	linux-[email protected]
145 		If set to 0 (default), the LED's normal state is off.
147 		If set to 1, the LED's normal state reflects the link state
149 		Setting this value also immediately changes the LED state.
153 What:		/sys/class/leds/<led>/link_10000
156 Contact:	linux-[email protected]
160 		If set to 0 (default), the LED's normal state is off.
162 		If set to 1, the LED's normal state reflects the link state
164 		Setting this value also immediately changes the LED state.
168 What:		/sys/class/leds/<led>/half_duplex
171 Contact:	linux-[email protected]
175 		If set to 0 (default), the LED's normal state is off.
177 		If set to 1, the LED's normal state reflects the link half
179 		Setting this value also immediately changes the LED state.
181 What:		/sys/class/leds/<led>/full_duplex
184 Contact:	linux-[email protected]
188 		If set to 0 (default), the LED's normal state is off.
190 		If set to 1, the LED's normal state reflects the link full
192 		Setting this value also immediately changes the LED state.