1// Derived from Inferno utils/6l/l.h and related files. 2// https://bitbucket.org/inferno-os/inferno-os/src/master/utils/6l/l.h 3// 4// Copyright © 1994-1999 Lucent Technologies Inc. All rights reserved. 5// Portions Copyright © 1995-1997 C H Forsyth ([email protected]) 6// Portions Copyright © 1997-1999 Vita Nuova Limited 7// Portions Copyright © 2000-2007 Vita Nuova Holdings Limited (www.vitanuova.com) 8// Portions Copyright © 2004,2006 Bruce Ellis 9// Portions Copyright © 2005-2007 C H Forsyth ([email protected]) 10// Revisions Copyright © 2000-2007 Lucent Technologies Inc. and others 11// Portions Copyright © 2009 The Go Authors. All rights reserved. 12// 13// Permission is hereby granted, free of charge, to any person obtaining a copy 14// of this software and associated documentation files (the "Software"), to deal 15// in the Software without restriction, including without limitation the rights 16// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 17// copies of the Software, and to permit persons to whom the Software is 18// furnished to do so, subject to the following conditions: 19// 20// The above copyright notice and this permission notice shall be included in 21// all copies or substantial portions of the Software. 22// 23// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 24// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 25// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 26// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 27// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 28// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 29// THE SOFTWARE. 30 31package objabi 32 33type RelocType int16 34 35//go:generate stringer -type=RelocType 36const ( 37 R_ADDR RelocType = 1 + iota 38 // R_ADDRPOWER relocates a pair of "D-form" instructions (instructions with 16-bit 39 // immediates in the low half of the instruction word), usually addis followed by 40 // another add or a load, inserting the "high adjusted" 16 bits of the address of 41 // the referenced symbol into the immediate field of the first instruction and the 42 // low 16 bits into that of the second instruction. 43 R_ADDRPOWER 44 // R_ADDRARM64 relocates an adrp, add pair to compute the address of the 45 // referenced symbol. 46 R_ADDRARM64 47 // R_ADDRMIPS (only used on mips/mips64) resolves to the low 16 bits of an external 48 // address, by encoding it into the instruction. 49 R_ADDRMIPS 50 // R_ADDROFF resolves to a 32-bit offset from the beginning of the section 51 // holding the data being relocated to the referenced symbol. 52 R_ADDROFF 53 R_SIZE 54 R_CALL 55 R_CALLARM 56 R_CALLARM64 57 R_CALLIND 58 R_CALLPOWER 59 // R_CALLMIPS (only used on mips64) resolves to non-PC-relative target address 60 // of a CALL (JAL) instruction, by encoding the address into the instruction. 61 R_CALLMIPS 62 R_CONST 63 R_PCREL 64 // R_TLS_LE, used on 386, amd64, and ARM, resolves to the offset of the 65 // thread-local symbol from the thread local base and is used to implement the 66 // "local exec" model for tls access (r.Sym is not set on intel platforms but is 67 // set to a TLS symbol -- runtime.tlsg -- in the linker when externally linking). 68 R_TLS_LE 69 // R_TLS_IE, used 386, amd64, and ARM resolves to the PC-relative offset to a GOT 70 // slot containing the offset from the thread-local symbol from the thread local 71 // base and is used to implemented the "initial exec" model for tls access (r.Sym 72 // is not set on intel platforms but is set to a TLS symbol -- runtime.tlsg -- in 73 // the linker when externally linking). 74 R_TLS_IE 75 R_GOTOFF 76 R_PLT0 77 R_PLT1 78 R_PLT2 79 R_USEFIELD 80 // R_USETYPE resolves to an *rtype, but no relocation is created. The 81 // linker uses this as a signal that the pointed-to type information 82 // should be linked into the final binary, even if there are no other 83 // direct references. (This is used for types reachable by reflection.) 84 R_USETYPE 85 // R_USEIFACE marks a type is converted to an interface in the function this 86 // relocation is applied to. The target is a type descriptor or an itab 87 // (in the latter case it refers to the concrete type contained in the itab). 88 // This is a marker relocation (0-sized), for the linker's reachabililty 89 // analysis. 90 R_USEIFACE 91 // R_USEIFACEMETHOD marks an interface method that is used in the function 92 // this relocation is applied to. The target is an interface type descriptor. 93 // The addend is the offset of the method in the type descriptor. 94 // This is a marker relocation (0-sized), for the linker's reachabililty 95 // analysis. 96 R_USEIFACEMETHOD 97 // R_USENAMEDMETHOD marks that methods with a specific name must not be eliminated. 98 // The target is a symbol containing the name of a method called via a generic 99 // interface or looked up via MethodByName("F"). 100 R_USENAMEDMETHOD 101 // R_METHODOFF resolves to a 32-bit offset from the beginning of the section 102 // holding the data being relocated to the referenced symbol. 103 // It is a variant of R_ADDROFF used when linking from the uncommonType of a 104 // *rtype, and may be set to zero by the linker if it determines the method 105 // text is unreachable by the linked program. 106 R_METHODOFF 107 // R_KEEP tells the linker to keep the referred-to symbol in the final binary 108 // if the symbol containing the R_KEEP relocation is in the final binary. 109 R_KEEP 110 R_POWER_TOC 111 R_GOTPCREL 112 // R_JMPMIPS (only used on mips64) resolves to non-PC-relative target address 113 // of a JMP instruction, by encoding the address into the instruction. 114 // The stack nosplit check ignores this since it is not a function call. 115 R_JMPMIPS 116 117 // R_DWARFSECREF resolves to the offset of the symbol from its section. 118 // Target of relocation must be size 4 (in current implementation). 119 R_DWARFSECREF 120 121 // R_DWARFFILEREF resolves to an index into the DWARF .debug_line 122 // file table for the specified file symbol. Must be applied to an 123 // attribute of form DW_FORM_data4. 124 R_DWARFFILEREF 125 126 // Platform dependent relocations. Architectures with fixed width instructions 127 // have the inherent issue that a 32-bit (or 64-bit!) displacement cannot be 128 // stuffed into a 32-bit instruction, so an address needs to be spread across 129 // several instructions, and in turn this requires a sequence of relocations, each 130 // updating a part of an instruction. This leads to relocation codes that are 131 // inherently processor specific. 132 133 // Arm64. 134 135 // Set a MOV[NZ] immediate field to bits [15:0] of the offset from the thread 136 // local base to the thread local variable defined by the referenced (thread 137 // local) symbol. Error if the offset does not fit into 16 bits. 138 R_ARM64_TLS_LE 139 140 // Relocates an ADRP; LD64 instruction sequence to load the offset between 141 // the thread local base and the thread local variable defined by the 142 // referenced (thread local) symbol from the GOT. 143 R_ARM64_TLS_IE 144 145 // R_ARM64_GOTPCREL relocates an adrp, ld64 pair to compute the address of the GOT 146 // slot of the referenced symbol. 147 R_ARM64_GOTPCREL 148 149 // R_ARM64_GOT resolves a GOT-relative instruction sequence, usually an adrp 150 // followed by another ld instruction. 151 R_ARM64_GOT 152 153 // R_ARM64_PCREL resolves a PC-relative addresses instruction sequence, usually an 154 // adrp followed by another add instruction. 155 R_ARM64_PCREL 156 157 // R_ARM64_PCREL_LDST8 resolves a PC-relative addresses instruction sequence, usually an 158 // adrp followed by a LD8 or ST8 instruction. 159 R_ARM64_PCREL_LDST8 160 161 // R_ARM64_PCREL_LDST16 resolves a PC-relative addresses instruction sequence, usually an 162 // adrp followed by a LD16 or ST16 instruction. 163 R_ARM64_PCREL_LDST16 164 165 // R_ARM64_PCREL_LDST32 resolves a PC-relative addresses instruction sequence, usually an 166 // adrp followed by a LD32 or ST32 instruction. 167 R_ARM64_PCREL_LDST32 168 169 // R_ARM64_PCREL_LDST64 resolves a PC-relative addresses instruction sequence, usually an 170 // adrp followed by a LD64 or ST64 instruction. 171 R_ARM64_PCREL_LDST64 172 173 // R_ARM64_LDST8 sets a LD/ST immediate value to bits [11:0] of a local address. 174 R_ARM64_LDST8 175 176 // R_ARM64_LDST16 sets a LD/ST immediate value to bits [11:1] of a local address. 177 R_ARM64_LDST16 178 179 // R_ARM64_LDST32 sets a LD/ST immediate value to bits [11:2] of a local address. 180 R_ARM64_LDST32 181 182 // R_ARM64_LDST64 sets a LD/ST immediate value to bits [11:3] of a local address. 183 R_ARM64_LDST64 184 185 // R_ARM64_LDST128 sets a LD/ST immediate value to bits [11:4] of a local address. 186 R_ARM64_LDST128 187 188 // PPC64. 189 190 // R_POWER_TLS_LE is used to implement the "local exec" model for tls 191 // access. It resolves to the offset of the thread-local symbol from the 192 // thread pointer (R13) and is split against a pair of instructions to 193 // support a 32 bit displacement. 194 R_POWER_TLS_LE 195 196 // R_POWER_TLS_IE is used to implement the "initial exec" model for tls access. It 197 // relocates a D-form, DS-form instruction sequence like R_ADDRPOWER_DS. It 198 // inserts to the offset of GOT slot for the thread-local symbol from the TOC (the 199 // GOT slot is filled by the dynamic linker with the offset of the thread-local 200 // symbol from the thread pointer (R13)). 201 R_POWER_TLS_IE 202 203 // R_POWER_TLS marks an X-form instruction such as "ADD R3,R13,R4" as completing 204 // a sequence of GOT-relative relocations to compute a TLS address. This can be 205 // used by the system linker to to rewrite the GOT-relative TLS relocation into a 206 // simpler thread-pointer relative relocation. See table 3.26 and 3.28 in the 207 // ppc64 elfv2 1.4 ABI on this transformation. Likewise, the second argument 208 // (usually called RB in X-form instructions) is assumed to be R13. 209 R_POWER_TLS 210 211 // R_POWER_TLS_IE_PCREL34 is similar to R_POWER_TLS_IE, but marks a single MOVD 212 // which has been assembled as a single prefixed load doubleword without using the 213 // TOC. 214 R_POWER_TLS_IE_PCREL34 215 216 // R_POWER_TLS_LE_TPREL34 is similar to R_POWER_TLS_LE, but computes an offset from 217 // the thread pointer in one prefixed instruction. 218 R_POWER_TLS_LE_TPREL34 219 220 // R_ADDRPOWER_DS is similar to R_ADDRPOWER above, but assumes the second 221 // instruction is a "DS-form" instruction, which has an immediate field occupying 222 // bits [15:2] of the instruction word. Bits [15:2] of the address of the 223 // relocated symbol are inserted into this field; it is an error if the last two 224 // bits of the address are not 0. 225 R_ADDRPOWER_DS 226 227 // R_ADDRPOWER_GOT relocates a D-form + DS-form instruction sequence by inserting 228 // a relative displacement of referenced symbol's GOT entry to the TOC pointer. 229 R_ADDRPOWER_GOT 230 231 // R_ADDRPOWER_GOT_PCREL34 is identical to R_ADDRPOWER_GOT, but uses a PC relative 232 // sequence to generate a GOT symbol addresses. 233 R_ADDRPOWER_GOT_PCREL34 234 235 // R_ADDRPOWER_PCREL relocates two D-form instructions like R_ADDRPOWER, but 236 // inserts the displacement from the place being relocated to the address of the 237 // relocated symbol instead of just its address. 238 R_ADDRPOWER_PCREL 239 240 // R_ADDRPOWER_TOCREL relocates two D-form instructions like R_ADDRPOWER, but 241 // inserts the offset from the TOC to the address of the relocated symbol 242 // rather than the symbol's address. 243 R_ADDRPOWER_TOCREL 244 245 // R_ADDRPOWER_TOCREL_DS relocates a D-form, DS-form instruction sequence like 246 // R_ADDRPOWER_DS but inserts the offset from the TOC to the address of the 247 // relocated symbol rather than the symbol's address. 248 R_ADDRPOWER_TOCREL_DS 249 250 // R_ADDRPOWER_D34 relocates a single prefixed D-form load/store operation. All 251 // prefixed forms are D form. The high 18 bits are stored in the prefix, 252 // and the low 16 are stored in the suffix. The address is absolute. 253 R_ADDRPOWER_D34 254 255 // R_ADDRPOWER_PCREL34 relates a single prefixed D-form load/store/add operation. 256 // All prefixed forms are D form. The resulting address is relative to the 257 // PC. It is a signed 34 bit offset. 258 R_ADDRPOWER_PCREL34 259 260 // RISC-V. 261 262 // R_RISCV_JAL resolves a 20 bit offset for a J-type instruction. 263 R_RISCV_JAL 264 265 // R_RISCV_JAL_TRAMP is the same as R_RISCV_JAL but denotes the use of a 266 // trampoline, which we may be able to avoid during relocation. These are 267 // only used by the linker and are not emitted by the compiler or assembler. 268 R_RISCV_JAL_TRAMP 269 270 // R_RISCV_CALL resolves a 32 bit PC-relative address for an AUIPC + JALR 271 // instruction pair. 272 R_RISCV_CALL 273 274 // R_RISCV_PCREL_ITYPE resolves a 32 bit PC-relative address for an 275 // AUIPC + I-type instruction pair. 276 R_RISCV_PCREL_ITYPE 277 278 // R_RISCV_PCREL_STYPE resolves a 32 bit PC-relative address for an 279 // AUIPC + S-type instruction pair. 280 R_RISCV_PCREL_STYPE 281 282 // R_RISCV_TLS_IE resolves a 32 bit TLS initial-exec address for an 283 // AUIPC + I-type instruction pair. 284 R_RISCV_TLS_IE 285 286 // R_RISCV_TLS_LE resolves a 32 bit TLS local-exec address for a 287 // LUI + I-type instruction sequence. 288 R_RISCV_TLS_LE 289 290 // R_RISCV_GOT_HI20 resolves the high 20 bits of a 32-bit PC-relative GOT 291 // address. 292 R_RISCV_GOT_HI20 293 294 // R_RISCV_PCREL_HI20 resolves the high 20 bits of a 32-bit PC-relative 295 // address. 296 R_RISCV_PCREL_HI20 297 298 // R_RISCV_PCREL_LO12_I resolves the low 12 bits of a 32-bit PC-relative 299 // address using an I-type instruction. 300 R_RISCV_PCREL_LO12_I 301 302 // R_RISCV_PCREL_LO12_S resolves the low 12 bits of a 32-bit PC-relative 303 // address using an S-type instruction. 304 R_RISCV_PCREL_LO12_S 305 306 // R_RISCV_BRANCH resolves a 12-bit PC-relative branch offset. 307 R_RISCV_BRANCH 308 309 // R_RISCV_RVC_BRANCH resolves an 8-bit PC-relative offset for a CB-type 310 // instruction. 311 R_RISCV_RVC_BRANCH 312 313 // R_RISCV_RVC_JUMP resolves an 11-bit PC-relative offset for a CJ-type 314 // instruction. 315 R_RISCV_RVC_JUMP 316 317 // R_PCRELDBL relocates s390x 2-byte aligned PC-relative addresses. 318 // TODO(mundaym): remove once variants can be serialized - see issue 14218. 319 R_PCRELDBL 320 321 // Loong64. 322 323 // R_LOONG64_ADDR_HI resolves to the sign-adjusted "upper" 20 bits (bit 5-24) of an 324 // external address, by encoding it into the instruction. 325 // R_LOONG64_ADDR_LO resolves to the low 12 bits of an external address, by encoding 326 // it into the instruction. 327 R_LOONG64_ADDR_HI 328 R_LOONG64_ADDR_LO 329 330 // R_LOONG64_TLS_LE_HI resolves to the high 20 bits of a TLS address (offset from 331 // thread pointer), by encoding it into the instruction. 332 // R_LOONG64_TLS_LE_LO resolves to the low 12 bits of a TLS address (offset from 333 // thread pointer), by encoding it into the instruction. 334 R_LOONG64_TLS_LE_HI 335 R_LOONG64_TLS_LE_LO 336 337 // R_CALLLOONG64 resolves to non-PC-relative target address of a CALL (BL/JIRL) 338 // instruction, by encoding the address into the instruction. 339 R_CALLLOONG64 340 341 // R_LOONG64_TLS_IE_HI and R_LOONG64_TLS_IE_LO relocates a pcalau12i, ld.d 342 // pair to compute the address of the GOT slot of the tls symbol. 343 R_LOONG64_TLS_IE_HI 344 R_LOONG64_TLS_IE_LO 345 346 // R_LOONG64_GOT_HI and R_LOONG64_GOT_LO resolves a GOT-relative instruction sequence, 347 // usually an pcalau12i followed by another ld or addi instruction. 348 R_LOONG64_GOT_HI 349 R_LOONG64_GOT_LO 350 351 // R_JMPLOONG64 resolves to non-PC-relative target address of a JMP instruction, 352 // by encoding the address into the instruction. 353 R_JMPLOONG64 354 355 // R_ADDRMIPSU (only used on mips/mips64) resolves to the sign-adjusted "upper" 16 356 // bits (bit 16-31) of an external address, by encoding it into the instruction. 357 R_ADDRMIPSU 358 // R_ADDRMIPSTLS (only used on mips64) resolves to the low 16 bits of a TLS 359 // address (offset from thread pointer), by encoding it into the instruction. 360 R_ADDRMIPSTLS 361 362 // R_ADDRCUOFF resolves to a pointer-sized offset from the start of the 363 // symbol's DWARF compile unit. 364 R_ADDRCUOFF 365 366 // R_WASMIMPORT resolves to the index of the WebAssembly function import. 367 R_WASMIMPORT 368 369 // R_XCOFFREF (only used on aix/ppc64) prevents garbage collection by ld 370 // of a symbol. This isn't a real relocation, it can be placed in anywhere 371 // in a symbol and target any symbols. 372 R_XCOFFREF 373 374 // R_PEIMAGEOFF resolves to a 32-bit offset from the start address of where 375 // the executable file is mapped in memory. 376 R_PEIMAGEOFF 377 378 // R_INITORDER specifies an ordering edge between two inittask records. 379 // (From one p..inittask record to another one.) 380 // This relocation does not apply any changes to the actual data, it is 381 // just used in the linker to order the inittask records appropriately. 382 R_INITORDER 383 384 // R_WEAK marks the relocation as a weak reference. 385 // A weak relocation does not make the symbol it refers to reachable, 386 // and is only honored by the linker if the symbol is in some other way 387 // reachable. 388 R_WEAK = -1 << 15 389 390 R_WEAKADDR = R_WEAK | R_ADDR 391 R_WEAKADDROFF = R_WEAK | R_ADDROFF 392) 393 394// IsDirectCall reports whether r is a relocation for a direct call. 395// A direct call is a CALL instruction that takes the target address 396// as an immediate. The address is embedded into the instruction(s), possibly 397// with limited width. An indirect call is a CALL instruction that takes 398// the target address in register or memory. 399func (r RelocType) IsDirectCall() bool { 400 switch r { 401 case R_CALL, R_CALLARM, R_CALLARM64, R_CALLLOONG64, R_CALLMIPS, R_CALLPOWER, 402 R_RISCV_CALL, R_RISCV_JAL, R_RISCV_JAL_TRAMP: 403 return true 404 } 405 return false 406} 407 408// IsDirectJump reports whether r is a relocation for a direct jump. 409// A direct jump is a JMP instruction that takes the target address 410// as an immediate. The address is embedded into the instruction, possibly 411// with limited width. An indirect jump is a JMP instruction that takes 412// the target address in register or memory. 413func (r RelocType) IsDirectJump() bool { 414 switch r { 415 case R_JMPMIPS: 416 return true 417 case R_JMPLOONG64: 418 return true 419 } 420 return false 421} 422 423// IsDirectCallOrJump reports whether r is a relocation for a direct 424// call or a direct jump. 425func (r RelocType) IsDirectCallOrJump() bool { 426 return r.IsDirectCall() || r.IsDirectJump() 427} 428