1 /** 2 ****************************************************************************** 3 * @file stm32l0xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L0xx_HAL_CONF_H 37 #define __STM32L0xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 /* Exported types ------------------------------------------------------------*/ 44 /* Exported constants --------------------------------------------------------*/ 45 46 /* ########################## Module Selection ############################## */ 47 /** 48 * @brief This is the list of modules to be used in the HAL driver 49 */ 50 51 #define HAL_MODULE_ENABLED 52 /*#define HAL_ADC_MODULE_ENABLED */ 53 /*#define HAL_CRYP_MODULE_ENABLED */ 54 /*#define HAL_COMP_MODULE_ENABLED */ 55 /*#define HAL_CRC_MODULE_ENABLED */ 56 /*#define HAL_CRYP_MODULE_ENABLED */ 57 /*#define HAL_DAC_MODULE_ENABLED */ 58 /*#define HAL_FIREWALL_MODULE_ENABLED */ 59 /*#define HAL_I2S_MODULE_ENABLED */ 60 /*#define HAL_IWDG_MODULE_ENABLED */ 61 /*#define HAL_LCD_MODULE_ENABLED */ 62 /*#define HAL_LPTIM_MODULE_ENABLED */ 63 /*#define HAL_RNG_MODULE_ENABLED */ 64 /*#define HAL_RTC_MODULE_ENABLED */ 65 #define HAL_SPI_MODULE_ENABLED 66 /*#define HAL_TIM_MODULE_ENABLED */ 67 /*#define HAL_TSC_MODULE_ENABLED */ 68 #define HAL_UART_MODULE_ENABLED 69 /*#define HAL_USART_MODULE_ENABLED */ 70 /*#define HAL_IRDA_MODULE_ENABLED */ 71 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 72 /*#define HAL_SMBUS_MODULE_ENABLED */ 73 /*#define HAL_WWDG_MODULE_ENABLED */ 74 /*#define HAL_PCD_MODULE_ENABLED */ 75 /*#define HAL_EXTI_MODULE_ENABLED */ 76 #define HAL_GPIO_MODULE_ENABLED 77 #define HAL_DMA_MODULE_ENABLED 78 #define HAL_I2C_MODULE_ENABLED 79 #define HAL_RCC_MODULE_ENABLED 80 #define HAL_FLASH_MODULE_ENABLED 81 #define HAL_PWR_MODULE_ENABLED 82 #define HAL_CORTEX_MODULE_ENABLED 83 84 /* ########################## Oscillator Values adaptation ####################*/ 85 /** 86 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 87 * This value is used by the RCC HAL module to compute the system frequency 88 * (when HSE is used as system clock source, directly or through the PLL). 89 */ 90 #if !defined (HSE_VALUE) 91 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ 92 #endif /* HSE_VALUE */ 93 94 #if !defined (HSE_STARTUP_TIMEOUT) 95 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 96 #endif /* HSE_STARTUP_TIMEOUT */ 97 98 /** 99 * @brief Internal Multiple Speed oscillator (MSI) default value. 100 * This value is the default MSI range value after Reset. 101 */ 102 #if !defined (MSI_VALUE) 103 #define MSI_VALUE ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/ 104 #endif /* MSI_VALUE */ 105 106 /** 107 * @brief Internal High Speed oscillator (HSI) value. 108 * This value is used by the RCC HAL module to compute the system frequency 109 * (when HSI is used as system clock source, directly or through the PLL). 110 */ 111 #if !defined (HSI_VALUE) 112 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 113 #endif /* HSI_VALUE */ 114 115 /** 116 * @brief Internal High Speed oscillator for USB (HSI48) value. 117 */ 118 #if !defined (HSI48_VALUE) 119 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. 120 The real value may vary depending on the variations 121 in voltage and temperature. */ 122 #endif /* HSI48_VALUE */ 123 124 /** 125 * @brief Internal Low Speed oscillator (LSI) value. 126 */ 127 #if !defined (LSI_VALUE) 128 #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ 129 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 130 The real value may vary depending on the variations 131 in voltage and temperature.*/ 132 /** 133 * @brief External Low Speed oscillator (LSE) value. 134 * This value is used by the UART, RTC HAL module to compute the system frequency 135 */ 136 #if !defined (LSE_VALUE) 137 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 138 #endif /* LSE_VALUE */ 139 140 #if !defined (LSE_STARTUP_TIMEOUT) 141 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 142 #endif /* LSE_STARTUP_TIMEOUT */ 143 144 /* Tip: To avoid modifying this file each time you need to use different HSE, 145 === you can define the HSE value in your toolchain compiler preprocessor. */ 146 147 /* ########################### System Configuration ######################### */ 148 /** 149 * @brief This is the HAL system configuration section 150 */ 151 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 152 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 153 #define USE_RTOS 0U 154 #define PREFETCH_ENABLE 0U 155 #define PREREAD_ENABLE 1U 156 #define BUFFER_CACHE_DISABLE 0U 157 158 /* ########################## Assert Selection ############################## */ 159 /** 160 * @brief Uncomment the line below to expanse the "assert_param" macro in the 161 * HAL drivers code 162 */ 163 /* #define USE_FULL_ASSERT 1U */ 164 165 /* Includes ------------------------------------------------------------------*/ 166 /** 167 * @brief Include module's header file 168 */ 169 170 #ifdef HAL_RCC_MODULE_ENABLED 171 #include "stm32l0xx_hal_rcc.h" 172 #endif /* HAL_RCC_MODULE_ENABLED */ 173 174 #ifdef HAL_EXTI_MODULE_ENABLED 175 #include "stm32l0xx_hal_exti.h" 176 #endif /* HAL_EXTI_MODULE_ENABLED */ 177 178 #ifdef HAL_GPIO_MODULE_ENABLED 179 #include "stm32l0xx_hal_gpio.h" 180 #endif /* HAL_GPIO_MODULE_ENABLED */ 181 182 #ifdef HAL_DMA_MODULE_ENABLED 183 #include "stm32l0xx_hal_dma.h" 184 #endif /* HAL_DMA_MODULE_ENABLED */ 185 186 #ifdef HAL_CORTEX_MODULE_ENABLED 187 #include "stm32l0xx_hal_cortex.h" 188 #endif /* HAL_CORTEX_MODULE_ENABLED */ 189 190 #ifdef HAL_ADC_MODULE_ENABLED 191 #include "stm32l0xx_hal_adc.h" 192 #endif /* HAL_ADC_MODULE_ENABLED */ 193 194 #ifdef HAL_COMP_MODULE_ENABLED 195 #include "stm32l0xx_hal_comp.h" 196 #endif /* HAL_COMP_MODULE_ENABLED */ 197 198 #ifdef HAL_CRC_MODULE_ENABLED 199 #include "stm32l0xx_hal_crc.h" 200 #endif /* HAL_CRC_MODULE_ENABLED */ 201 202 #ifdef HAL_CRYP_MODULE_ENABLED 203 #include "stm32l0xx_hal_cryp.h" 204 #endif /* HAL_CRYP_MODULE_ENABLED */ 205 206 #ifdef HAL_DAC_MODULE_ENABLED 207 #include "stm32l0xx_hal_dac.h" 208 #endif /* HAL_DAC_MODULE_ENABLED */ 209 210 #ifdef HAL_FIREWALL_MODULE_ENABLED 211 #include "stm32l0xx_hal_firewall.h" 212 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 213 214 #ifdef HAL_FLASH_MODULE_ENABLED 215 #include "stm32l0xx_hal_flash.h" 216 #endif /* HAL_FLASH_MODULE_ENABLED */ 217 218 #ifdef HAL_I2C_MODULE_ENABLED 219 #include "stm32l0xx_hal_i2c.h" 220 #endif /* HAL_I2C_MODULE_ENABLED */ 221 222 #ifdef HAL_I2S_MODULE_ENABLED 223 #include "stm32l0xx_hal_i2s.h" 224 #endif /* HAL_I2S_MODULE_ENABLED */ 225 226 #ifdef HAL_IWDG_MODULE_ENABLED 227 #include "stm32l0xx_hal_iwdg.h" 228 #endif /* HAL_IWDG_MODULE_ENABLED */ 229 230 #ifdef HAL_LCD_MODULE_ENABLED 231 #include "stm32l0xx_hal_lcd.h" 232 #endif /* HAL_LCD_MODULE_ENABLED */ 233 234 #ifdef HAL_LPTIM_MODULE_ENABLED 235 #include "stm32l0xx_hal_lptim.h" 236 #endif /* HAL_LPTIM_MODULE_ENABLED */ 237 238 #ifdef HAL_PWR_MODULE_ENABLED 239 #include "stm32l0xx_hal_pwr.h" 240 #endif /* HAL_PWR_MODULE_ENABLED */ 241 242 #ifdef HAL_RNG_MODULE_ENABLED 243 #include "stm32l0xx_hal_rng.h" 244 #endif /* HAL_RNG_MODULE_ENABLED */ 245 246 #ifdef HAL_RTC_MODULE_ENABLED 247 #include "stm32l0xx_hal_rtc.h" 248 249 #endif /* HAL_RTC_MODULE_ENABLED */ 250 251 #ifdef HAL_SPI_MODULE_ENABLED 252 #include "stm32l0xx_hal_spi.h" 253 #endif /* HAL_SPI_MODULE_ENABLED */ 254 255 #ifdef HAL_TIM_MODULE_ENABLED 256 #include "stm32l0xx_hal_tim.h" 257 #endif /* HAL_TIM_MODULE_ENABLED */ 258 259 #ifdef HAL_TSC_MODULE_ENABLED 260 #include "stm32l0xx_hal_tsc.h" 261 #endif /* HAL_TSC_MODULE_ENABLED */ 262 263 #ifdef HAL_UART_MODULE_ENABLED 264 #include "stm32l0xx_hal_uart.h" 265 #endif /* HAL_UART_MODULE_ENABLED */ 266 267 #ifdef HAL_USART_MODULE_ENABLED 268 #include "stm32l0xx_hal_usart.h" 269 #endif /* HAL_USART_MODULE_ENABLED */ 270 271 #ifdef HAL_IRDA_MODULE_ENABLED 272 #include "stm32l0xx_hal_irda.h" 273 #endif /* HAL_IRDA_MODULE_ENABLED */ 274 275 #ifdef HAL_SMARTCARD_MODULE_ENABLED 276 #include "stm32l0xx_hal_smartcard.h" 277 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 278 279 #ifdef HAL_SMBUS_MODULE_ENABLED 280 #include "stm32l0xx_hal_smbus.h" 281 #endif /* HAL_SMBUS_MODULE_ENABLED */ 282 283 #ifdef HAL_WWDG_MODULE_ENABLED 284 #include "stm32l0xx_hal_wwdg.h" 285 #endif /* HAL_WWDG_MODULE_ENABLED */ 286 287 #ifdef HAL_PCD_MODULE_ENABLED 288 #include "stm32l0xx_hal_pcd.h" 289 #endif /* HAL_PCD_MODULE_ENABLED */ 290 291 /* Exported macro ------------------------------------------------------------*/ 292 #ifdef USE_FULL_ASSERT 293 /** 294 * @brief The assert_param macro is used for function's parameters check. 295 * @param expr: If expr is false, it calls assert_failed function 296 * which reports the name of the source file and the source 297 * line number of the call that failed. 298 * If expr is true, it returns no value. 299 * @retval None 300 */ 301 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 302 /* Exported functions ------------------------------------------------------- */ 303 void assert_failed(uint8_t* file, uint32_t line); 304 #else 305 #define assert_param(expr) ((void)0U) 306 #endif /* USE_FULL_ASSERT */ 307 308 #ifdef __cplusplus 309 } 310 #endif 311 312 #endif /* __STM32L0xx_HAL_CONF_H */ 313 314 315 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 316