1 /* 2 * Copyright (C) 2009-2012 by Matthias Ringwald 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 24 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at [email protected] 34 * 35 */ 36 37 /* 38 * hci.h 39 * 40 * Created by Matthias Ringwald on 4/29/09. 41 * 42 */ 43 44 #ifndef __HCI_H 45 #define __HCI_H 46 47 #include "btstack-config.h" 48 49 #include <btstack/hci_cmds.h> 50 #include <btstack/utils.h> 51 #include "hci_transport.h" 52 #include "bt_control.h" 53 #include "remote_device_db.h" 54 55 #include <stdint.h> 56 #include <stdlib.h> 57 #include <stdarg.h> 58 59 #if defined __cplusplus 60 extern "C" { 61 #endif 62 63 // packet header sizes 64 #define HCI_CMD_HEADER_SIZE 3 65 #define HCI_ACL_HEADER_SIZE 4 66 #define HCI_SCO_HEADER_SIZE 3 67 #define HCI_EVENT_HEADER_SIZE 2 68 69 // packet sizes (max payload) 70 #define HCI_ACL_DM1_SIZE 17 71 #define HCI_ACL_DH1_SIZE 27 72 #define HCI_ACL_2DH1_SIZE 54 73 #define HCI_ACL_3DH1_SIZE 83 74 #define HCI_ACL_DM3_SIZE 121 75 #define HCI_ACL_DH3_SIZE 183 76 #define HCI_ACL_DM5_SIZE 224 77 #define HCI_ACL_DH5_SIZE 339 78 #define HCI_ACL_2DH3_SIZE 367 79 #define HCI_ACL_3DH3_SIZE 552 80 #define HCI_ACL_2DH5_SIZE 679 81 #define HCI_ACL_3DH5_SIZE 1021 82 83 #define HCI_EVENT_PAYLOAD_SIZE 255 84 #define HCI_CMD_PAYLOAD_SIZE 255 85 86 // packet buffer sizes 87 // HCI_ACL_PAYLOAD_SIZE is configurable and defined in config.h 88 #define HCI_EVENT_BUFFER_SIZE (HCI_EVENT_HEADER_SIZE + HCI_EVENT_PAYLOAD_SIZE) 89 #define HCI_CMD_BUFFER_SIZE (HCI_CMD_HEADER_SIZE + HCI_CMD_PAYLOAD_SIZE) 90 #define HCI_ACL_BUFFER_SIZE (HCI_ACL_HEADER_SIZE + HCI_ACL_PAYLOAD_SIZE) 91 92 // size of hci buffers, big enough for command, event, or acl packet without H4 packet type 93 // @note cmd buffer is bigger than event buffer 94 #ifdef HCI_PACKET_BUFFER_SIZE 95 #if HCI_PACKET_BUFFER_SIZE < HCI_ACL_BUFFER_SIZE 96 #error HCI_PACKET_BUFFER_SIZE must be equal or larger than HCI_ACL_BUFFER_SIZE 97 #endif 98 #if HCI_PACKET_BUFFER_SIZE < HCI_CMD_BUFFER_SIZE 99 #error HCI_PACKET_BUFFER_SIZE must be equal or larger than HCI_CMD_BUFFER_SIZE 100 #endif 101 #else 102 #if HCI_ACL_BUFFER_SIZE > HCI_CMD_BUFFER_SIZE 103 #define HCI_PACKET_BUFFER_SIZE HCI_ACL_BUFFER_SIZE 104 #else 105 #define HCI_PACKET_BUFFER_SIZE HCI_CMD_BUFFER_SIZE 106 #endif 107 #endif 108 109 // OGFs 110 #define OGF_LINK_CONTROL 0x01 111 #define OGF_LINK_POLICY 0x02 112 #define OGF_CONTROLLER_BASEBAND 0x03 113 #define OGF_INFORMATIONAL_PARAMETERS 0x04 114 #define OGF_LE_CONTROLLER 0x08 115 #define OGF_BTSTACK 0x3d 116 #define OGF_VENDOR 0x3f 117 118 // cmds for BTstack 119 // get state: @returns HCI_STATE 120 #define BTSTACK_GET_STATE 0x01 121 122 // set power mode: @param HCI_POWER_MODE 123 #define BTSTACK_SET_POWER_MODE 0x02 124 125 // set capture mode: @param on 126 #define BTSTACK_SET_ACL_CAPTURE_MODE 0x03 127 128 // get BTstack version 129 #define BTSTACK_GET_VERSION 0x04 130 131 // get system Bluetooth state 132 #define BTSTACK_GET_SYSTEM_BLUETOOTH_ENABLED 0x05 133 134 // set system Bluetooth state 135 #define BTSTACK_SET_SYSTEM_BLUETOOTH_ENABLED 0x06 136 137 // enable inquiry scan for this client 138 #define BTSTACK_SET_DISCOVERABLE 0x07 139 140 // set global Bluetooth state 141 #define BTSTACK_SET_BLUETOOTH_ENABLED 0x08 142 143 // create l2cap channel: @param bd_addr(48), psm (16) 144 #define L2CAP_CREATE_CHANNEL 0x20 145 146 // disconnect l2cap disconnect, @param channel(16), reason(8) 147 #define L2CAP_DISCONNECT 0x21 148 149 // register l2cap service: @param psm(16), mtu (16) 150 #define L2CAP_REGISTER_SERVICE 0x22 151 152 // unregister l2cap disconnect, @param psm(16) 153 #define L2CAP_UNREGISTER_SERVICE 0x23 154 155 // accept connection @param bd_addr(48), dest cid (16) 156 #define L2CAP_ACCEPT_CONNECTION 0x24 157 158 // decline l2cap disconnect,@param bd_addr(48), dest cid (16), reason(8) 159 #define L2CAP_DECLINE_CONNECTION 0x25 160 161 // create l2cap channel: @param bd_addr(48), psm (16), mtu (16) 162 #define L2CAP_CREATE_CHANNEL_MTU 0x26 163 164 // register SDP Service Record: service record (size) 165 #define SDP_REGISTER_SERVICE_RECORD 0x30 166 167 // unregister SDP Service Record 168 #define SDP_UNREGISTER_SERVICE_RECORD 0x31 169 170 // Get remote RFCOMM services 171 #define SDP_CLIENT_QUERY_RFCOMM_SERVICES 0x32 172 173 // Get remote SDP services 174 #define SDP_CLIENT_QUERY_SERVICES 0x33 175 176 // RFCOMM "HCI" Commands 177 #define RFCOMM_CREATE_CHANNEL 0x40 178 #define RFCOMM_DISCONNECT 0x41 179 #define RFCOMM_REGISTER_SERVICE 0x42 180 #define RFCOMM_UNREGISTER_SERVICE 0x43 181 #define RFCOMM_ACCEPT_CONNECTION 0x44 182 #define RFCOMM_DECLINE_CONNECTION 0x45 183 #define RFCOMM_PERSISTENT_CHANNEL 0x46 184 #define RFCOMM_CREATE_CHANNEL_WITH_CREDITS 0x47 185 #define RFCOMM_REGISTER_SERVICE_WITH_CREDITS 0x48 186 #define RFCOMM_GRANT_CREDITS 0x49 187 188 // GAP Classic 0x50 189 #define GAP_DISCONNECT 0x50 190 191 // GAP LE 0x60 192 #define GAP_LE_SCAN_START 0x60 193 #define GAP_LE_SCAN_STOP 0x61 194 #define GAP_LE_CONNECT 0x62 195 #define GAP_LE_CONNECT_CANCEL 0x63 196 #define GAP_LE_SET_SCAN_PARAMETERS 0x64 197 198 // GATT (Client) 0x70 199 #define GATT_DISCOVER_ALL_PRIMARY_SERVICES 0x70 200 #define GATT_DISCOVER_PRIMARY_SERVICES_BY_UUID16 0x71 201 #define GATT_DISCOVER_PRIMARY_SERVICES_BY_UUID128 0x72 202 #define GATT_FIND_INCLUDED_SERVICES_FOR_SERVICE 0x73 203 #define GATT_DISCOVER_CHARACTERISTICS_FOR_SERVICE 0x74 204 #define GATT_DISCOVER_CHARACTERISTICS_FOR_SERVICE_BY_UUID128 0x75 205 #define GATT_DISCOVER_CHARACTERISTIC_DESCRIPTORS 0x76 206 #define GATT_READ_VALUE_OF_CHARACTERISTIC 0x77 207 #define GATT_READ_LONG_VALUE_OF_CHARACTERISTIC 0x78 208 #define GATT_WRITE_VALUE_OF_CHARACTERISTIC_WITHOUT_RESPONSE 0x79 209 #define GATT_WRITE_VALUE_OF_CHARACTERISTIC 0x7A 210 #define GATT_WRITE_LONG_VALUE_OF_CHARACTERISTIC 0x7B 211 #define GATT_RELIABLE_WRITE_LONG_VALUE_OF_CHARACTERISTIC 0x7C 212 #define GATT_READ_CHARACTERISTIC_DESCRIPTOR 0X7D 213 #define GATT_READ_LONG_CHARACTERISTIC_DESCRIPTOR 0X7E 214 #define GATT_WRITE_CHARACTERISTIC_DESCRIPTOR 0X7F 215 #define GATT_WRITE_LONG_CHARACTERISTIC_DESCRIPTOR 0X80 216 #define GATT_WRITE_CLIENT_CHARACTERISTIC_CONFIGURATION 0X81 217 218 // 219 #define IS_COMMAND(packet, command) (READ_BT_16(packet,0) == command.opcode) 220 221 // data: event(8) 222 #define DAEMON_EVENT_CONNECTION_OPENED 0x50 223 224 // data: event(8) 225 #define DAEMON_EVENT_CONNECTION_CLOSED 0x51 226 227 // data: event(8), nr_connections(8) 228 #define DAEMON_NR_CONNECTIONS_CHANGED 0x52 229 230 // data: event(8) 231 #define DAEMON_EVENT_NEW_RFCOMM_CREDITS 0x53 232 233 // data: event() 234 #define DAEMON_EVENT_HCI_PACKET_SENT 0x54 235 236 /** 237 * Connection State 238 */ 239 typedef enum { 240 AUTH_FLAGS_NONE = 0x0000, 241 RECV_LINK_KEY_REQUEST = 0x0001, 242 HANDLE_LINK_KEY_REQUEST = 0x0002, 243 SENT_LINK_KEY_REPLY = 0x0004, 244 SENT_LINK_KEY_NEGATIVE_REQUEST = 0x0008, 245 RECV_LINK_KEY_NOTIFICATION = 0x0010, 246 DENY_PIN_CODE_REQUEST = 0x0040, 247 RECV_IO_CAPABILITIES_REQUEST = 0x0080, 248 SEND_IO_CAPABILITIES_REPLY = 0x0100, 249 SEND_USER_CONFIRM_REPLY = 0x0200, 250 SEND_USER_PASSKEY_REPLY = 0x0400, 251 252 // pairing status 253 LEGACY_PAIRING_ACTIVE = 0x2000, 254 SSP_PAIRING_ACTIVE = 0x4000, 255 256 // connection status 257 CONNECTION_ENCRYPTED = 0x8000, 258 } hci_authentication_flags_t; 259 260 typedef enum { 261 SEND_CREATE_CONNECTION = 0, 262 SENT_CREATE_CONNECTION, 263 SEND_CANCEL_CONNECTION, 264 SENT_CANCEL_CONNECTION, 265 RECEIVED_CONNECTION_REQUEST, 266 ACCEPTED_CONNECTION_REQUEST, 267 REJECTED_CONNECTION_REQUEST, 268 OPEN, 269 SEND_DISCONNECT, 270 SENT_DISCONNECT 271 } CONNECTION_STATE; 272 273 typedef enum { 274 BONDING_REQUEST_REMOTE_FEATURES = 0x01, 275 BONDING_RECEIVED_REMOTE_FEATURES = 0x02, 276 BONDING_REMOTE_SUPPORTS_SSP = 0x04, 277 BONDING_DISCONNECT_SECURITY_BLOCK = 0x08, 278 BONDING_DISCONNECT_DEDICATED_DONE = 0x10, 279 BONDING_SEND_AUTHENTICATE_REQUEST = 0x20, 280 BONDING_SEND_ENCRYPTION_REQUEST = 0x40, 281 BONDING_DEDICATED = 0x80, 282 } bonding_flags_t; 283 284 typedef enum { 285 BLUETOOTH_OFF = 1, 286 BLUETOOTH_ON, 287 BLUETOOTH_ACTIVE 288 } BLUETOOTH_STATE; 289 290 // le central scanning state 291 typedef enum { 292 LE_SCAN_IDLE, 293 LE_START_SCAN, 294 LE_SCANNING, 295 LE_STOP_SCAN, 296 } le_scanning_state_t; 297 298 299 typedef struct { 300 // linked list - assert: first field 301 linked_item_t item; 302 303 // remote side 304 bd_addr_t address; 305 306 // module handle 307 hci_con_handle_t con_handle; 308 309 // le public, le random, classic 310 bd_addr_type_t address_type; 311 312 // connection state 313 CONNECTION_STATE state; 314 315 // bonding 316 uint16_t bonding_flags; 317 318 // requested security level 319 gap_security_level_t requested_security_level; 320 321 // 322 link_key_type_t link_key_type; 323 324 // errands 325 uint32_t authentication_flags; 326 327 timer_source_t timeout; 328 329 #ifdef HAVE_TIME 330 // timer 331 struct timeval timestamp; 332 #endif 333 #ifdef HAVE_TICK 334 uint32_t timestamp; // timeout in system ticks 335 #endif 336 337 // ACL packet recombination - ACL Header + ACL payload 338 uint8_t acl_recombination_buffer[4 + HCI_ACL_BUFFER_SIZE]; 339 uint16_t acl_recombination_pos; 340 uint16_t acl_recombination_length; 341 342 // number ACL packets sent to controller 343 uint8_t num_acl_packets_sent; 344 } hci_connection_t; 345 346 347 /** 348 * main data structure 349 */ 350 typedef struct { 351 // transport component with configuration 352 hci_transport_t * hci_transport; 353 void * config; 354 355 // bsic configuration 356 const char * local_name; 357 uint32_t class_of_device; 358 bd_addr_t local_bd_addr; 359 uint8_t ssp_enable; 360 uint8_t ssp_io_capability; 361 uint8_t ssp_authentication_requirement; 362 uint8_t ssp_auto_accept; 363 364 // hardware power controller 365 bt_control_t * control; 366 367 // list of existing baseband connections 368 linked_list_t connections; 369 370 // single buffer for HCI Command assembly 371 uint8_t hci_packet_buffer[HCI_PACKET_BUFFER_SIZE]; // opcode (16), len(8) 372 uint8_t hci_packet_buffer_reserved; 373 374 /* host to controller flow control */ 375 uint8_t num_cmd_packets; 376 // uint8_t total_num_cmd_packets; 377 uint8_t total_num_acl_packets; 378 uint16_t acl_data_packet_length; 379 uint8_t total_num_le_packets; 380 uint16_t le_data_packet_length; 381 382 /* local supported features */ 383 uint8_t local_supported_features[8]; 384 385 // usable packet types given acl_data_packet_length and HCI_ACL_BUFFER_SIZE 386 uint16_t packet_types; 387 388 /* callback to L2CAP layer */ 389 void (*packet_handler)(uint8_t packet_type, uint8_t *packet, uint16_t size); 390 391 /* remote device db */ 392 remote_device_db_t const*remote_device_db; 393 394 /* hci state machine */ 395 HCI_STATE state; 396 uint8_t substate; 397 uint8_t cmds_ready; 398 399 uint16_t last_cmd_opcode; 400 401 uint8_t discoverable; 402 uint8_t connectable; 403 uint8_t bondable; 404 405 /* buffer for scan enable cmd - 0xff no change */ 406 uint8_t new_scan_enable_value; 407 408 // buffer for single connection decline 409 uint8_t decline_reason; 410 bd_addr_t decline_addr; 411 412 uint8_t adv_addr_type; 413 bd_addr_t adv_address; 414 415 le_scanning_state_t le_scanning_state; 416 417 // buffer for le scan type command - 0xff not set 418 uint8_t le_scan_type; 419 uint16_t le_scan_interval; 420 uint16_t le_scan_window; 421 } hci_stack_t; 422 423 //*************** le client start 424 425 le_command_status_t le_central_start_scan(); 426 le_command_status_t le_central_stop_scan(); 427 le_command_status_t le_central_connect(bd_addr_t * addr, bd_addr_type_t addr_type); 428 le_command_status_t le_central_connect_cancel(); 429 le_command_status_t gap_disconnect(hci_con_handle_t handle); 430 void le_central_set_scan_parameters(uint8_t scan_type, uint16_t scan_interval, uint16_t scan_window); 431 432 //*************** le client end 433 434 // create and send hci command packets based on a template and a list of parameters 435 uint16_t hci_create_cmd(uint8_t *hci_cmd_buffer, hci_cmd_t *cmd, ...); 436 uint16_t hci_create_cmd_internal(uint8_t *hci_cmd_buffer, const hci_cmd_t *cmd, va_list argptr); 437 438 void hci_connectable_control(uint8_t enable); 439 void hci_close(void); 440 441 /** 442 * run the hci control loop once 443 */ 444 void hci_run(void); 445 446 // send complete CMD packet 447 int hci_send_cmd_packet(uint8_t *packet, int size); 448 449 // send ACL packet 450 int hci_send_acl_packet(uint8_t *packet, int size); 451 452 // non-blocking UART driver needs 453 int hci_can_send_packet_now(uint8_t packet_type); 454 455 // same as hci_can_send_packet_now, but also checks if packet buffer is free for use 456 int hci_can_send_packet_now_using_packet_buffer(uint8_t packet_type); 457 458 // reserves outgoing packet buffer. @returns 1 if successful 459 int hci_reserve_packet_buffer(void); 460 void hci_release_packet_buffer(void); 461 462 // used for internal checks in l2cap[-le].c 463 int hci_is_packet_buffer_reserved(void); 464 465 // get point to packet buffer 466 uint8_t* hci_get_outgoing_packet_buffer(void); 467 468 bd_addr_t * hci_local_bd_addr(void); 469 hci_connection_t * hci_connection_for_handle(hci_con_handle_t con_handle); 470 hci_connection_t * hci_connection_for_bd_addr_and_type(bd_addr_t *addr, bd_addr_type_t addr_type); 471 int hci_is_le_connection(hci_connection_t * connection); 472 uint8_t hci_number_outgoing_packets(hci_con_handle_t handle); 473 uint8_t hci_number_free_acl_slots(void); 474 int hci_authentication_active_for_handle(hci_con_handle_t handle); 475 uint16_t hci_max_acl_data_packet_length(void); 476 uint16_t hci_usable_acl_packet_types(void); 477 int hci_non_flushable_packet_boundary_flag_supported(void); 478 479 void hci_disconnect_all(); 480 481 void hci_emit_state(void); 482 void hci_emit_connection_complete(hci_connection_t *conn, uint8_t status); 483 void hci_emit_l2cap_check_timeout(hci_connection_t *conn); 484 void hci_emit_disconnection_complete(uint16_t handle, uint8_t reason); 485 void hci_emit_nr_connections_changed(void); 486 void hci_emit_hci_open_failed(void); 487 void hci_emit_btstack_version(void); 488 void hci_emit_system_bluetooth_enabled(uint8_t enabled); 489 void hci_emit_remote_name_cached(bd_addr_t *addr, device_name_t *name); 490 void hci_emit_discoverable_enabled(uint8_t enabled); 491 void hci_emit_security_level(hci_con_handle_t con_handle, gap_security_level_t level); 492 void hci_emit_dedicated_bonding_result(hci_connection_t * connection, uint8_t status); 493 494 // query if remote side supports SSP 495 // query if the local side supports SSP 496 int hci_local_ssp_activated(); 497 498 // query if the remote side supports SSP 499 int hci_remote_ssp_supported(hci_con_handle_t con_handle); 500 501 // query if both sides support SSP 502 int hci_ssp_supported_on_both_sides(hci_con_handle_t handle); 503 504 // disable automatic l2cap disconnect for testing 505 void hci_disable_l2cap_timeout_check(); 506 507 // disconnect because of security block 508 void hci_disconnect_security_block(hci_con_handle_t con_handle); 509 510 /** Embedded API **/ 511 512 // Set up HCI. Needs to be called before any other function 513 void hci_init(hci_transport_t *transport, void *config, bt_control_t *control, remote_device_db_t const* remote_device_db); 514 515 // Set class of device that will be set during Bluetooth init 516 void hci_set_class_of_device(uint32_t class_of_device); 517 518 // Registers a packet handler. Used if L2CAP is not used (rarely). 519 void hci_register_packet_handler(void (*handler)(uint8_t packet_type, uint8_t *packet, uint16_t size)); 520 521 // Requests the change of BTstack power mode. 522 int hci_power_control(HCI_POWER_MODE mode); 523 524 // Allows to control if device is discoverable. OFF by default. 525 void hci_discoverable_control(uint8_t enable); 526 527 // Creates and sends HCI command packets based on a template and 528 // a list of parameters. Will return error if outgoing data buffer 529 // is occupied. 530 int hci_send_cmd(const hci_cmd_t *cmd, ...); 531 532 // Deletes link key for remote device with baseband address. 533 void hci_drop_link_key_for_bd_addr(bd_addr_t *addr); 534 535 // Configure Secure Simple Pairing 536 537 // enable will enable SSP during init 538 void hci_ssp_set_enable(int enable); 539 540 // if set, BTstack will respond to io capability request using authentication requirement 541 void hci_ssp_set_io_capability(int ssp_io_capability); 542 void hci_ssp_set_authentication_requirement(int authentication_requirement); 543 544 // if set, BTstack will confirm a numberic comparion and enter '000000' if requested 545 void hci_ssp_set_auto_accept(int auto_accept); 546 547 // get addr type and address used in advertisement packets 548 void hci_le_advertisement_address(uint8_t * addr_type, bd_addr_t * addr); 549 550 551 #if defined __cplusplus 552 } 553 #endif 554 555 #endif // __HCI_H 556