1 /**
2 ******************************************************************************
3 * @file stm32wbxx_ll_gpio.h
4 * @author MCD Application Team
5 * @brief Header file of GPIO LL module.
6 ******************************************************************************
7 * @attention
8 *
9 * <h2><center>© Copyright (c) 2019 STMicroelectronics.
10 * All rights reserved.</center></h2>
11 *
12 * This software component is licensed by ST under BSD 3-Clause license,
13 * the "License"; You may not use this file except in compliance with the
14 * License. You may obtain a copy of the License at:
15 * opensource.org/licenses/BSD-3-Clause
16 *
17 ******************************************************************************
18 */
19
20 /* Define to prevent recursive inclusion -------------------------------------*/
21 #ifndef STM32WBxx_LL_GPIO_H
22 #define STM32WBxx_LL_GPIO_H
23
24 #ifdef __cplusplus
25 extern "C" {
26 #endif
27
28 /* Includes ------------------------------------------------------------------*/
29 #include "stm32wbxx.h"
30
31 /** @addtogroup STM32WBxx_LL_Driver
32 * @{
33 */
34
35 #if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOH)
36
37 /** @defgroup GPIO_LL GPIO
38 * @{
39 */
40 /** MISRA C:2012 deviation rule has been granted for following rules:
41 * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..]
42 * which may be out of array bounds [..,UNKNOWN] in following APIs:
43 * LL_GPIO_GetAFPin_0_7
44 * LL_GPIO_SetAFPin_0_7
45 * LL_GPIO_SetAFPin_8_15
46 * LL_GPIO_GetAFPin_8_15
47 */
48
49 /* Private types -------------------------------------------------------------*/
50 /* Private variables ---------------------------------------------------------*/
51 /* Private constants ---------------------------------------------------------*/
52 /* Private macros ------------------------------------------------------------*/
53 #if defined(USE_FULL_LL_DRIVER)
54 /** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
55 * @{
56 */
57
58 /**
59 * @}
60 */
61 #endif /*USE_FULL_LL_DRIVER*/
62
63 /* Exported types ------------------------------------------------------------*/
64 #if defined(USE_FULL_LL_DRIVER)
65 /** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
66 * @{
67 */
68
69 /**
70 * @brief LL GPIO Init Structure definition
71 */
72 typedef struct
73 {
74 uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
75 This parameter can be any value of @ref GPIO_LL_EC_PIN */
76
77 uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
78 This parameter can be a value of @ref GPIO_LL_EC_MODE.
79
80 GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
81
82 uint32_t Speed; /*!< Specifies the speed for the selected pins.
83 This parameter can be a value of @ref GPIO_LL_EC_SPEED.
84
85 GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
86
87 uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
88 This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
89
90 GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
91
92 uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
93 This parameter can be a value of @ref GPIO_LL_EC_PULL.
94
95 GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
96
97 uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
98 This parameter can be a value of @ref GPIO_LL_EC_AF.
99
100 GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
101 } LL_GPIO_InitTypeDef;
102
103 /**
104 * @}
105 */
106 #endif /* USE_FULL_LL_DRIVER */
107
108 /* Exported constants --------------------------------------------------------*/
109 /** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
110 * @{
111 */
112
113 /** @defgroup GPIO_LL_EC_PIN PIN
114 * @{
115 */
116 #define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */
117 #define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */
118 #define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */
119 #define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */
120 #define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */
121 #define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */
122 #define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */
123 #define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */
124 #define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */
125 #define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */
126 #define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */
127 #define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */
128 #define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */
129 #define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */
130 #define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */
131 #define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */
132 #define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \
133 GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \
134 GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \
135 GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \
136 GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \
137 GPIO_BSRR_BS15) /*!< Select all pins */
138 /**
139 * @}
140 */
141
142 /** @defgroup GPIO_LL_EC_MODE Mode
143 * @{
144 */
145 #define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
146 #define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */
147 #define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */
148 #define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */
149 /**
150 * @}
151 */
152
153 /** @defgroup GPIO_LL_EC_OUTPUT Output Type
154 * @{
155 */
156 #define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
157 #define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */
158 /**
159 * @}
160 */
161
162 /** @defgroup GPIO_LL_EC_SPEED Output Speed
163 * @{
164 */
165 #define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
166 #define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */
167 #define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */
168 #define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */
169 /**
170 * @}
171 */
172
173 /** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
174 * @{
175 */
176 #define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
177 #define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */
178 #define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */
179 /**
180 * @}
181 */
182
183 /** @defgroup GPIO_LL_EC_AF Alternate Function
184 * @{
185 */
186 #define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
187 #define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
188 #define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
189 #define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
190 #define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
191 #define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
192 #define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
193 #define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
194 #define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
195 #define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
196 #define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
197 #define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */
198 #define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */
199 #define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */
200 #define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */
201 #define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */
202 /**
203 * @}
204 */
205
206 /**
207 * @}
208 */
209
210 /* Exported macro ------------------------------------------------------------*/
211 /** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
212 * @{
213 */
214
215 /** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
216 * @{
217 */
218
219 /**
220 * @brief Write a value in GPIO register
221 * @param __INSTANCE__ GPIO Instance
222 * @param __REG__ Register to be written
223 * @param __VALUE__ Value to be written in the register
224 * @retval None
225 */
226 #define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
227
228 /**
229 * @brief Read a value in GPIO register
230 * @param __INSTANCE__ GPIO Instance
231 * @param __REG__ Register to be read
232 * @retval Register value
233 */
234 #define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
235 /**
236 * @}
237 */
238
239 /**
240 * @}
241 */
242
243 /* Exported functions --------------------------------------------------------*/
244 /** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
245 * @{
246 */
247
248 /** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
249 * @{
250 */
251
252 /**
253 * @brief Configure gpio mode for a dedicated pin on dedicated port.
254 * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
255 * @note Warning: only one pin can be passed as parameter.
256 * @rmtoll MODER MODEy LL_GPIO_SetPinMode
257 * @param GPIOx GPIO Port
258 * @param Pin This parameter can be one of the following values:
259 * @arg @ref LL_GPIO_PIN_0
260 * @arg @ref LL_GPIO_PIN_1
261 * @arg @ref LL_GPIO_PIN_2
262 * @arg @ref LL_GPIO_PIN_3
263 * @arg @ref LL_GPIO_PIN_4
264 * @arg @ref LL_GPIO_PIN_5
265 * @arg @ref LL_GPIO_PIN_6
266 * @arg @ref LL_GPIO_PIN_7
267 * @arg @ref LL_GPIO_PIN_8
268 * @arg @ref LL_GPIO_PIN_9
269 * @arg @ref LL_GPIO_PIN_10
270 * @arg @ref LL_GPIO_PIN_11
271 * @arg @ref LL_GPIO_PIN_12
272 * @arg @ref LL_GPIO_PIN_13
273 * @arg @ref LL_GPIO_PIN_14
274 * @arg @ref LL_GPIO_PIN_15
275 * @param Mode This parameter can be one of the following values:
276 * @arg @ref LL_GPIO_MODE_INPUT
277 * @arg @ref LL_GPIO_MODE_OUTPUT
278 * @arg @ref LL_GPIO_MODE_ALTERNATE
279 * @arg @ref LL_GPIO_MODE_ANALOG
280 * @retval None
281 */
LL_GPIO_SetPinMode(GPIO_TypeDef * GPIOx,uint32_t Pin,uint32_t Mode)282 __STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
283 {
284 MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
285 }
286
287 /**
288 * @brief Return gpio mode for a dedicated pin on dedicated port.
289 * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
290 * @note Warning: only one pin can be passed as parameter.
291 * @rmtoll MODER MODEy LL_GPIO_GetPinMode
292 * @param GPIOx GPIO Port
293 * @param Pin This parameter can be one of the following values:
294 * @arg @ref LL_GPIO_PIN_0
295 * @arg @ref LL_GPIO_PIN_1
296 * @arg @ref LL_GPIO_PIN_2
297 * @arg @ref LL_GPIO_PIN_3
298 * @arg @ref LL_GPIO_PIN_4
299 * @arg @ref LL_GPIO_PIN_5
300 * @arg @ref LL_GPIO_PIN_6
301 * @arg @ref LL_GPIO_PIN_7
302 * @arg @ref LL_GPIO_PIN_8
303 * @arg @ref LL_GPIO_PIN_9
304 * @arg @ref LL_GPIO_PIN_10
305 * @arg @ref LL_GPIO_PIN_11
306 * @arg @ref LL_GPIO_PIN_12
307 * @arg @ref LL_GPIO_PIN_13
308 * @arg @ref LL_GPIO_PIN_14
309 * @arg @ref LL_GPIO_PIN_15
310 * @retval Returned value can be one of the following values:
311 * @arg @ref LL_GPIO_MODE_INPUT
312 * @arg @ref LL_GPIO_MODE_OUTPUT
313 * @arg @ref LL_GPIO_MODE_ALTERNATE
314 * @arg @ref LL_GPIO_MODE_ANALOG
315 */
LL_GPIO_GetPinMode(GPIO_TypeDef * GPIOx,uint32_t Pin)316 __STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
317 {
318 return (uint32_t)(READ_BIT(GPIOx->MODER,
319 (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
320 }
321
322 /**
323 * @brief Configure gpio output type for several pins on dedicated port.
324 * @note Output type as to be set when gpio pin is in output or
325 * alternate modes. Possible type are Push-pull or Open-drain.
326 * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
327 * @param GPIOx GPIO Port
328 * @param PinMask This parameter can be a combination of the following values:
329 * @arg @ref LL_GPIO_PIN_0
330 * @arg @ref LL_GPIO_PIN_1
331 * @arg @ref LL_GPIO_PIN_2
332 * @arg @ref LL_GPIO_PIN_3
333 * @arg @ref LL_GPIO_PIN_4
334 * @arg @ref LL_GPIO_PIN_5
335 * @arg @ref LL_GPIO_PIN_6
336 * @arg @ref LL_GPIO_PIN_7
337 * @arg @ref LL_GPIO_PIN_8
338 * @arg @ref LL_GPIO_PIN_9
339 * @arg @ref LL_GPIO_PIN_10
340 * @arg @ref LL_GPIO_PIN_11
341 * @arg @ref LL_GPIO_PIN_12
342 * @arg @ref LL_GPIO_PIN_13
343 * @arg @ref LL_GPIO_PIN_14
344 * @arg @ref LL_GPIO_PIN_15
345 * @arg @ref LL_GPIO_PIN_ALL
346 * @param OutputType This parameter can be one of the following values:
347 * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
348 * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
349 * @retval None
350 */
LL_GPIO_SetPinOutputType(GPIO_TypeDef * GPIOx,uint32_t PinMask,uint32_t OutputType)351 __STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
352 {
353 MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
354 }
355
356 /**
357 * @brief Return gpio output type for several pins on dedicated port.
358 * @note Output type as to be set when gpio pin is in output or
359 * alternate modes. Possible type are Push-pull or Open-drain.
360 * @note Warning: only one pin can be passed as parameter.
361 * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
362 * @param GPIOx GPIO Port
363 * @param Pin This parameter can be one of the following values:
364 * @arg @ref LL_GPIO_PIN_0
365 * @arg @ref LL_GPIO_PIN_1
366 * @arg @ref LL_GPIO_PIN_2
367 * @arg @ref LL_GPIO_PIN_3
368 * @arg @ref LL_GPIO_PIN_4
369 * @arg @ref LL_GPIO_PIN_5
370 * @arg @ref LL_GPIO_PIN_6
371 * @arg @ref LL_GPIO_PIN_7
372 * @arg @ref LL_GPIO_PIN_8
373 * @arg @ref LL_GPIO_PIN_9
374 * @arg @ref LL_GPIO_PIN_10
375 * @arg @ref LL_GPIO_PIN_11
376 * @arg @ref LL_GPIO_PIN_12
377 * @arg @ref LL_GPIO_PIN_13
378 * @arg @ref LL_GPIO_PIN_14
379 * @arg @ref LL_GPIO_PIN_15
380 * @arg @ref LL_GPIO_PIN_ALL
381 * @retval Returned value can be one of the following values:
382 * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
383 * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
384 */
LL_GPIO_GetPinOutputType(GPIO_TypeDef * GPIOx,uint32_t Pin)385 __STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
386 {
387 return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin));
388 }
389
390 /**
391 * @brief Configure gpio speed for a dedicated pin on dedicated port.
392 * @note I/O speed can be Low, Medium, Fast or High speed.
393 * @note Warning: only one pin can be passed as parameter.
394 * @note Refer to datasheet for frequency specifications and the power
395 * supply and load conditions for each speed.
396 * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
397 * @param GPIOx GPIO Port
398 * @param Pin This parameter can be one of the following values:
399 * @arg @ref LL_GPIO_PIN_0
400 * @arg @ref LL_GPIO_PIN_1
401 * @arg @ref LL_GPIO_PIN_2
402 * @arg @ref LL_GPIO_PIN_3
403 * @arg @ref LL_GPIO_PIN_4
404 * @arg @ref LL_GPIO_PIN_5
405 * @arg @ref LL_GPIO_PIN_6
406 * @arg @ref LL_GPIO_PIN_7
407 * @arg @ref LL_GPIO_PIN_8
408 * @arg @ref LL_GPIO_PIN_9
409 * @arg @ref LL_GPIO_PIN_10
410 * @arg @ref LL_GPIO_PIN_11
411 * @arg @ref LL_GPIO_PIN_12
412 * @arg @ref LL_GPIO_PIN_13
413 * @arg @ref LL_GPIO_PIN_14
414 * @arg @ref LL_GPIO_PIN_15
415 * @param Speed This parameter can be one of the following values:
416 * @arg @ref LL_GPIO_SPEED_FREQ_LOW
417 * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
418 * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
419 * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
420 * @retval None
421 */
LL_GPIO_SetPinSpeed(GPIO_TypeDef * GPIOx,uint32_t Pin,uint32_t Speed)422 __STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
423 {
424 MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U)),
425 (Speed << (POSITION_VAL(Pin) * 2U)));
426 }
427
428 /**
429 * @brief Return gpio speed for a dedicated pin on dedicated port.
430 * @note I/O speed can be Low, Medium, Fast or High speed.
431 * @note Warning: only one pin can be passed as parameter.
432 * @note Refer to datasheet for frequency specifications and the power
433 * supply and load conditions for each speed.
434 * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
435 * @param GPIOx GPIO Port
436 * @param Pin This parameter can be one of the following values:
437 * @arg @ref LL_GPIO_PIN_0
438 * @arg @ref LL_GPIO_PIN_1
439 * @arg @ref LL_GPIO_PIN_2
440 * @arg @ref LL_GPIO_PIN_3
441 * @arg @ref LL_GPIO_PIN_4
442 * @arg @ref LL_GPIO_PIN_5
443 * @arg @ref LL_GPIO_PIN_6
444 * @arg @ref LL_GPIO_PIN_7
445 * @arg @ref LL_GPIO_PIN_8
446 * @arg @ref LL_GPIO_PIN_9
447 * @arg @ref LL_GPIO_PIN_10
448 * @arg @ref LL_GPIO_PIN_11
449 * @arg @ref LL_GPIO_PIN_12
450 * @arg @ref LL_GPIO_PIN_13
451 * @arg @ref LL_GPIO_PIN_14
452 * @arg @ref LL_GPIO_PIN_15
453 * @retval Returned value can be one of the following values:
454 * @arg @ref LL_GPIO_SPEED_FREQ_LOW
455 * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
456 * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
457 * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
458 */
LL_GPIO_GetPinSpeed(GPIO_TypeDef * GPIOx,uint32_t Pin)459 __STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
460 {
461 return (uint32_t)(READ_BIT(GPIOx->OSPEEDR,
462 (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
463 }
464
465 /**
466 * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
467 * @note Warning: only one pin can be passed as parameter.
468 * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
469 * @param GPIOx GPIO Port
470 * @param Pin This parameter can be one of the following values:
471 * @arg @ref LL_GPIO_PIN_0
472 * @arg @ref LL_GPIO_PIN_1
473 * @arg @ref LL_GPIO_PIN_2
474 * @arg @ref LL_GPIO_PIN_3
475 * @arg @ref LL_GPIO_PIN_4
476 * @arg @ref LL_GPIO_PIN_5
477 * @arg @ref LL_GPIO_PIN_6
478 * @arg @ref LL_GPIO_PIN_7
479 * @arg @ref LL_GPIO_PIN_8
480 * @arg @ref LL_GPIO_PIN_9
481 * @arg @ref LL_GPIO_PIN_10
482 * @arg @ref LL_GPIO_PIN_11
483 * @arg @ref LL_GPIO_PIN_12
484 * @arg @ref LL_GPIO_PIN_13
485 * @arg @ref LL_GPIO_PIN_14
486 * @arg @ref LL_GPIO_PIN_15
487 * @param Pull This parameter can be one of the following values:
488 * @arg @ref LL_GPIO_PULL_NO
489 * @arg @ref LL_GPIO_PULL_UP
490 * @arg @ref LL_GPIO_PULL_DOWN
491 * @retval None
492 */
LL_GPIO_SetPinPull(GPIO_TypeDef * GPIOx,uint32_t Pin,uint32_t Pull)493 __STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
494 {
495 MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
496 }
497
498 /**
499 * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
500 * @note Warning: only one pin can be passed as parameter.
501 * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
502 * @param GPIOx GPIO Port
503 * @param Pin This parameter can be one of the following values:
504 * @arg @ref LL_GPIO_PIN_0
505 * @arg @ref LL_GPIO_PIN_1
506 * @arg @ref LL_GPIO_PIN_2
507 * @arg @ref LL_GPIO_PIN_3
508 * @arg @ref LL_GPIO_PIN_4
509 * @arg @ref LL_GPIO_PIN_5
510 * @arg @ref LL_GPIO_PIN_6
511 * @arg @ref LL_GPIO_PIN_7
512 * @arg @ref LL_GPIO_PIN_8
513 * @arg @ref LL_GPIO_PIN_9
514 * @arg @ref LL_GPIO_PIN_10
515 * @arg @ref LL_GPIO_PIN_11
516 * @arg @ref LL_GPIO_PIN_12
517 * @arg @ref LL_GPIO_PIN_13
518 * @arg @ref LL_GPIO_PIN_14
519 * @arg @ref LL_GPIO_PIN_15
520 * @retval Returned value can be one of the following values:
521 * @arg @ref LL_GPIO_PULL_NO
522 * @arg @ref LL_GPIO_PULL_UP
523 * @arg @ref LL_GPIO_PULL_DOWN
524 */
LL_GPIO_GetPinPull(GPIO_TypeDef * GPIOx,uint32_t Pin)525 __STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
526 {
527 return (uint32_t)(READ_BIT(GPIOx->PUPDR,
528 (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
529 }
530
531 /**
532 * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
533 * @note Possible values are from AF0 to AF15 depending on target.
534 * @note Warning: only one pin can be passed as parameter.
535 * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
536 * @param GPIOx GPIO Port
537 * @param Pin This parameter can be one of the following values:
538 * @arg @ref LL_GPIO_PIN_0
539 * @arg @ref LL_GPIO_PIN_1
540 * @arg @ref LL_GPIO_PIN_2
541 * @arg @ref LL_GPIO_PIN_3
542 * @arg @ref LL_GPIO_PIN_4
543 * @arg @ref LL_GPIO_PIN_5
544 * @arg @ref LL_GPIO_PIN_6
545 * @arg @ref LL_GPIO_PIN_7
546 * @param Alternate This parameter can be one of the following values:
547 * @arg @ref LL_GPIO_AF_0
548 * @arg @ref LL_GPIO_AF_1
549 * @arg @ref LL_GPIO_AF_2
550 * @arg @ref LL_GPIO_AF_3
551 * @arg @ref LL_GPIO_AF_4
552 * @arg @ref LL_GPIO_AF_5
553 * @arg @ref LL_GPIO_AF_6
554 * @arg @ref LL_GPIO_AF_7
555 * @arg @ref LL_GPIO_AF_8
556 * @arg @ref LL_GPIO_AF_9
557 * @arg @ref LL_GPIO_AF_10
558 * @arg @ref LL_GPIO_AF_11
559 * @arg @ref LL_GPIO_AF_12
560 * @arg @ref LL_GPIO_AF_13
561 * @arg @ref LL_GPIO_AF_14
562 * @arg @ref LL_GPIO_AF_15
563 * @retval None
564 */
LL_GPIO_SetAFPin_0_7(GPIO_TypeDef * GPIOx,uint32_t Pin,uint32_t Alternate)565 __STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
566 {
567 MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)),
568 (Alternate << (POSITION_VAL(Pin) * 4U)));
569 }
570
571 /**
572 * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
573 * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
574 * @param GPIOx GPIO Port
575 * @param Pin This parameter can be one of the following values:
576 * @arg @ref LL_GPIO_PIN_0
577 * @arg @ref LL_GPIO_PIN_1
578 * @arg @ref LL_GPIO_PIN_2
579 * @arg @ref LL_GPIO_PIN_3
580 * @arg @ref LL_GPIO_PIN_4
581 * @arg @ref LL_GPIO_PIN_5
582 * @arg @ref LL_GPIO_PIN_6
583 * @arg @ref LL_GPIO_PIN_7
584 * @retval Returned value can be one of the following values:
585 * @arg @ref LL_GPIO_AF_0
586 * @arg @ref LL_GPIO_AF_1
587 * @arg @ref LL_GPIO_AF_2
588 * @arg @ref LL_GPIO_AF_3
589 * @arg @ref LL_GPIO_AF_4
590 * @arg @ref LL_GPIO_AF_5
591 * @arg @ref LL_GPIO_AF_6
592 * @arg @ref LL_GPIO_AF_7
593 * @arg @ref LL_GPIO_AF_8
594 * @arg @ref LL_GPIO_AF_9
595 * @arg @ref LL_GPIO_AF_10
596 * @arg @ref LL_GPIO_AF_11
597 * @arg @ref LL_GPIO_AF_12
598 * @arg @ref LL_GPIO_AF_13
599 * @arg @ref LL_GPIO_AF_14
600 * @arg @ref LL_GPIO_AF_15
601 */
LL_GPIO_GetAFPin_0_7(GPIO_TypeDef * GPIOx,uint32_t Pin)602 __STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
603 {
604 return (uint32_t)(READ_BIT(GPIOx->AFR[0],
605 (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
606 }
607
608 /**
609 * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
610 * @note Possible values are from AF0 to AF15 depending on target.
611 * @note Warning: only one pin can be passed as parameter.
612 * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
613 * @param GPIOx GPIO Port
614 * @param Pin This parameter can be one of the following values:
615 * @arg @ref LL_GPIO_PIN_8
616 * @arg @ref LL_GPIO_PIN_9
617 * @arg @ref LL_GPIO_PIN_10
618 * @arg @ref LL_GPIO_PIN_11
619 * @arg @ref LL_GPIO_PIN_12
620 * @arg @ref LL_GPIO_PIN_13
621 * @arg @ref LL_GPIO_PIN_14
622 * @arg @ref LL_GPIO_PIN_15
623 * @param Alternate This parameter can be one of the following values:
624 * @arg @ref LL_GPIO_AF_0
625 * @arg @ref LL_GPIO_AF_1
626 * @arg @ref LL_GPIO_AF_2
627 * @arg @ref LL_GPIO_AF_3
628 * @arg @ref LL_GPIO_AF_4
629 * @arg @ref LL_GPIO_AF_5
630 * @arg @ref LL_GPIO_AF_6
631 * @arg @ref LL_GPIO_AF_7
632 * @arg @ref LL_GPIO_AF_8
633 * @arg @ref LL_GPIO_AF_9
634 * @arg @ref LL_GPIO_AF_10
635 * @arg @ref LL_GPIO_AF_11
636 * @arg @ref LL_GPIO_AF_12
637 * @arg @ref LL_GPIO_AF_13
638 * @arg @ref LL_GPIO_AF_14
639 * @arg @ref LL_GPIO_AF_15
640 * @retval None
641 */
LL_GPIO_SetAFPin_8_15(GPIO_TypeDef * GPIOx,uint32_t Pin,uint32_t Alternate)642 __STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
643 {
644 MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)),
645 (Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
646 }
647
648 /**
649 * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
650 * @note Possible values are from AF0 to AF15 depending on target.
651 * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
652 * @param GPIOx GPIO Port
653 * @param Pin This parameter can be one of the following values:
654 * @arg @ref LL_GPIO_PIN_8
655 * @arg @ref LL_GPIO_PIN_9
656 * @arg @ref LL_GPIO_PIN_10
657 * @arg @ref LL_GPIO_PIN_11
658 * @arg @ref LL_GPIO_PIN_12
659 * @arg @ref LL_GPIO_PIN_13
660 * @arg @ref LL_GPIO_PIN_14
661 * @arg @ref LL_GPIO_PIN_15
662 * @retval Returned value can be one of the following values:
663 * @arg @ref LL_GPIO_AF_0
664 * @arg @ref LL_GPIO_AF_1
665 * @arg @ref LL_GPIO_AF_2
666 * @arg @ref LL_GPIO_AF_3
667 * @arg @ref LL_GPIO_AF_4
668 * @arg @ref LL_GPIO_AF_5
669 * @arg @ref LL_GPIO_AF_6
670 * @arg @ref LL_GPIO_AF_7
671 * @arg @ref LL_GPIO_AF_8
672 * @arg @ref LL_GPIO_AF_9
673 * @arg @ref LL_GPIO_AF_10
674 * @arg @ref LL_GPIO_AF_11
675 * @arg @ref LL_GPIO_AF_12
676 * @arg @ref LL_GPIO_AF_13
677 * @arg @ref LL_GPIO_AF_14
678 * @arg @ref LL_GPIO_AF_15
679 */
LL_GPIO_GetAFPin_8_15(GPIO_TypeDef * GPIOx,uint32_t Pin)680 __STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
681 {
682 return (uint32_t)(READ_BIT(GPIOx->AFR[1],
683 (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U));
684 }
685
686
687 /**
688 * @brief Lock configuration of several pins for a dedicated port.
689 * @note When the lock sequence has been applied on a port bit, the
690 * value of this port bit can no longer be modified until the
691 * next reset.
692 * @note Each lock bit freezes a specific configuration register
693 * (control and alternate function registers).
694 * @rmtoll LCKR LCKK LL_GPIO_LockPin
695 * @param GPIOx GPIO Port
696 * @param PinMask This parameter can be a combination of the following values:
697 * @arg @ref LL_GPIO_PIN_0
698 * @arg @ref LL_GPIO_PIN_1
699 * @arg @ref LL_GPIO_PIN_2
700 * @arg @ref LL_GPIO_PIN_3
701 * @arg @ref LL_GPIO_PIN_4
702 * @arg @ref LL_GPIO_PIN_5
703 * @arg @ref LL_GPIO_PIN_6
704 * @arg @ref LL_GPIO_PIN_7
705 * @arg @ref LL_GPIO_PIN_8
706 * @arg @ref LL_GPIO_PIN_9
707 * @arg @ref LL_GPIO_PIN_10
708 * @arg @ref LL_GPIO_PIN_11
709 * @arg @ref LL_GPIO_PIN_12
710 * @arg @ref LL_GPIO_PIN_13
711 * @arg @ref LL_GPIO_PIN_14
712 * @arg @ref LL_GPIO_PIN_15
713 * @arg @ref LL_GPIO_PIN_ALL
714 * @retval None
715 */
LL_GPIO_LockPin(GPIO_TypeDef * GPIOx,uint32_t PinMask)716 __STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
717 {
718 __IO uint32_t temp;
719 WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
720 WRITE_REG(GPIOx->LCKR, PinMask);
721 WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
722 /* Read LCKK register. This read is mandatory to complete key lock sequence */
723 temp = READ_REG(GPIOx->LCKR);
724 (void) temp;
725 }
726
727 /**
728 * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
729 * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
730 * @param GPIOx GPIO Port
731 * @param PinMask This parameter can be a combination of the following values:
732 * @arg @ref LL_GPIO_PIN_0
733 * @arg @ref LL_GPIO_PIN_1
734 * @arg @ref LL_GPIO_PIN_2
735 * @arg @ref LL_GPIO_PIN_3
736 * @arg @ref LL_GPIO_PIN_4
737 * @arg @ref LL_GPIO_PIN_5
738 * @arg @ref LL_GPIO_PIN_6
739 * @arg @ref LL_GPIO_PIN_7
740 * @arg @ref LL_GPIO_PIN_8
741 * @arg @ref LL_GPIO_PIN_9
742 * @arg @ref LL_GPIO_PIN_10
743 * @arg @ref LL_GPIO_PIN_11
744 * @arg @ref LL_GPIO_PIN_12
745 * @arg @ref LL_GPIO_PIN_13
746 * @arg @ref LL_GPIO_PIN_14
747 * @arg @ref LL_GPIO_PIN_15
748 * @arg @ref LL_GPIO_PIN_ALL
749 * @retval State of bit (1 or 0).
750 */
LL_GPIO_IsPinLocked(GPIO_TypeDef * GPIOx,uint32_t PinMask)751 __STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
752 {
753 return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL);
754 }
755
756 /**
757 * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
758 * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
759 * @param GPIOx GPIO Port
760 * @retval State of bit (1 or 0).
761 */
LL_GPIO_IsAnyPinLocked(GPIO_TypeDef * GPIOx)762 __STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
763 {
764 return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL);
765 }
766
767 /**
768 * @}
769 */
770
771 /** @defgroup GPIO_LL_EF_Data_Access Data Access
772 * @{
773 */
774
775 /**
776 * @brief Return full input data register value for a dedicated port.
777 * @rmtoll IDR IDy LL_GPIO_ReadInputPort
778 * @param GPIOx GPIO Port
779 * @retval Input data register value of port
780 */
LL_GPIO_ReadInputPort(GPIO_TypeDef * GPIOx)781 __STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
782 {
783 return (uint32_t)(READ_REG(GPIOx->IDR));
784 }
785
786 /**
787 * @brief Return if input data level for several pins of dedicated port is high or low.
788 * @rmtoll IDR IDy LL_GPIO_IsInputPinSet
789 * @param GPIOx GPIO Port
790 * @param PinMask This parameter can be a combination of the following values:
791 * @arg @ref LL_GPIO_PIN_0
792 * @arg @ref LL_GPIO_PIN_1
793 * @arg @ref LL_GPIO_PIN_2
794 * @arg @ref LL_GPIO_PIN_3
795 * @arg @ref LL_GPIO_PIN_4
796 * @arg @ref LL_GPIO_PIN_5
797 * @arg @ref LL_GPIO_PIN_6
798 * @arg @ref LL_GPIO_PIN_7
799 * @arg @ref LL_GPIO_PIN_8
800 * @arg @ref LL_GPIO_PIN_9
801 * @arg @ref LL_GPIO_PIN_10
802 * @arg @ref LL_GPIO_PIN_11
803 * @arg @ref LL_GPIO_PIN_12
804 * @arg @ref LL_GPIO_PIN_13
805 * @arg @ref LL_GPIO_PIN_14
806 * @arg @ref LL_GPIO_PIN_15
807 * @arg @ref LL_GPIO_PIN_ALL
808 * @retval State of bit (1 or 0).
809 */
LL_GPIO_IsInputPinSet(GPIO_TypeDef * GPIOx,uint32_t PinMask)810 __STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
811 {
812 return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL);
813 }
814
815 /**
816 * @brief Write output data register for the port.
817 * @rmtoll ODR ODy LL_GPIO_WriteOutputPort
818 * @param GPIOx GPIO Port
819 * @param PortValue Level value for each pin of the port
820 * @retval None
821 */
LL_GPIO_WriteOutputPort(GPIO_TypeDef * GPIOx,uint32_t PortValue)822 __STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
823 {
824 WRITE_REG(GPIOx->ODR, PortValue);
825 }
826
827 /**
828 * @brief Return full output data register value for a dedicated port.
829 * @rmtoll ODR ODy LL_GPIO_ReadOutputPort
830 * @param GPIOx GPIO Port
831 * @retval Output data register value of port
832 */
LL_GPIO_ReadOutputPort(GPIO_TypeDef * GPIOx)833 __STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
834 {
835 return (uint32_t)(READ_REG(GPIOx->ODR));
836 }
837
838 /**
839 * @brief Return if input data level for several pins of dedicated port is high or low.
840 * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
841 * @param GPIOx GPIO Port
842 * @param PinMask This parameter can be a combination of the following values:
843 * @arg @ref LL_GPIO_PIN_0
844 * @arg @ref LL_GPIO_PIN_1
845 * @arg @ref LL_GPIO_PIN_2
846 * @arg @ref LL_GPIO_PIN_3
847 * @arg @ref LL_GPIO_PIN_4
848 * @arg @ref LL_GPIO_PIN_5
849 * @arg @ref LL_GPIO_PIN_6
850 * @arg @ref LL_GPIO_PIN_7
851 * @arg @ref LL_GPIO_PIN_8
852 * @arg @ref LL_GPIO_PIN_9
853 * @arg @ref LL_GPIO_PIN_10
854 * @arg @ref LL_GPIO_PIN_11
855 * @arg @ref LL_GPIO_PIN_12
856 * @arg @ref LL_GPIO_PIN_13
857 * @arg @ref LL_GPIO_PIN_14
858 * @arg @ref LL_GPIO_PIN_15
859 * @arg @ref LL_GPIO_PIN_ALL
860 * @retval State of bit (1 or 0).
861 */
LL_GPIO_IsOutputPinSet(GPIO_TypeDef * GPIOx,uint32_t PinMask)862 __STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
863 {
864 return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL);
865 }
866
867 /**
868 * @brief Set several pins to high level on dedicated gpio port.
869 * @rmtoll BSRR BSy LL_GPIO_SetOutputPin
870 * @param GPIOx GPIO Port
871 * @param PinMask This parameter can be a combination of the following values:
872 * @arg @ref LL_GPIO_PIN_0
873 * @arg @ref LL_GPIO_PIN_1
874 * @arg @ref LL_GPIO_PIN_2
875 * @arg @ref LL_GPIO_PIN_3
876 * @arg @ref LL_GPIO_PIN_4
877 * @arg @ref LL_GPIO_PIN_5
878 * @arg @ref LL_GPIO_PIN_6
879 * @arg @ref LL_GPIO_PIN_7
880 * @arg @ref LL_GPIO_PIN_8
881 * @arg @ref LL_GPIO_PIN_9
882 * @arg @ref LL_GPIO_PIN_10
883 * @arg @ref LL_GPIO_PIN_11
884 * @arg @ref LL_GPIO_PIN_12
885 * @arg @ref LL_GPIO_PIN_13
886 * @arg @ref LL_GPIO_PIN_14
887 * @arg @ref LL_GPIO_PIN_15
888 * @arg @ref LL_GPIO_PIN_ALL
889 * @retval None
890 */
LL_GPIO_SetOutputPin(GPIO_TypeDef * GPIOx,uint32_t PinMask)891 __STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
892 {
893 WRITE_REG(GPIOx->BSRR, PinMask);
894 }
895
896 /**
897 * @brief Set several pins to low level on dedicated gpio port.
898 * @rmtoll BRR BRy LL_GPIO_ResetOutputPin
899 * @param GPIOx GPIO Port
900 * @param PinMask This parameter can be a combination of the following values:
901 * @arg @ref LL_GPIO_PIN_0
902 * @arg @ref LL_GPIO_PIN_1
903 * @arg @ref LL_GPIO_PIN_2
904 * @arg @ref LL_GPIO_PIN_3
905 * @arg @ref LL_GPIO_PIN_4
906 * @arg @ref LL_GPIO_PIN_5
907 * @arg @ref LL_GPIO_PIN_6
908 * @arg @ref LL_GPIO_PIN_7
909 * @arg @ref LL_GPIO_PIN_8
910 * @arg @ref LL_GPIO_PIN_9
911 * @arg @ref LL_GPIO_PIN_10
912 * @arg @ref LL_GPIO_PIN_11
913 * @arg @ref LL_GPIO_PIN_12
914 * @arg @ref LL_GPIO_PIN_13
915 * @arg @ref LL_GPIO_PIN_14
916 * @arg @ref LL_GPIO_PIN_15
917 * @arg @ref LL_GPIO_PIN_ALL
918 * @retval None
919 */
LL_GPIO_ResetOutputPin(GPIO_TypeDef * GPIOx,uint32_t PinMask)920 __STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
921 {
922 WRITE_REG(GPIOx->BRR, PinMask);
923 }
924
925 /**
926 * @brief Toggle data value for several pin of dedicated port.
927 * @rmtoll ODR ODy LL_GPIO_TogglePin
928 * @param GPIOx GPIO Port
929 * @param PinMask This parameter can be a combination of the following values:
930 * @arg @ref LL_GPIO_PIN_0
931 * @arg @ref LL_GPIO_PIN_1
932 * @arg @ref LL_GPIO_PIN_2
933 * @arg @ref LL_GPIO_PIN_3
934 * @arg @ref LL_GPIO_PIN_4
935 * @arg @ref LL_GPIO_PIN_5
936 * @arg @ref LL_GPIO_PIN_6
937 * @arg @ref LL_GPIO_PIN_7
938 * @arg @ref LL_GPIO_PIN_8
939 * @arg @ref LL_GPIO_PIN_9
940 * @arg @ref LL_GPIO_PIN_10
941 * @arg @ref LL_GPIO_PIN_11
942 * @arg @ref LL_GPIO_PIN_12
943 * @arg @ref LL_GPIO_PIN_13
944 * @arg @ref LL_GPIO_PIN_14
945 * @arg @ref LL_GPIO_PIN_15
946 * @arg @ref LL_GPIO_PIN_ALL
947 * @retval None
948 */
LL_GPIO_TogglePin(GPIO_TypeDef * GPIOx,uint32_t PinMask)949 __STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
950 {
951 WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask);
952 }
953
954 /**
955 * @}
956 */
957
958 #if defined(USE_FULL_LL_DRIVER)
959 /** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
960 * @{
961 */
962
963 ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
964 ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
965 void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
966
967 /**
968 * @}
969 */
970 #endif /* USE_FULL_LL_DRIVER */
971
972 /**
973 * @}
974 */
975
976 /**
977 * @}
978 */
979
980 #endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOH) */
981 /**
982 * @}
983 */
984
985 #ifdef __cplusplus
986 }
987 #endif
988
989 #endif /* STM32WBxx_LL_GPIO_H */
990
991 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
992